Power, Generation, Energy Expert #22BAF3

Consultant, Midwestern US

I have 40 years of experience, and specialize in the field of electric power generation with specific knowledge in the areas of central station power plant, design, construction, operation and maintenance. I have published on such topics as flow accelerated corrosion and high energy piping system design, life cycle management of power generation units and construction and start-up of major additions to power plant equipment. I have testified 8 times on topics such as generating unit performance and ability to meet stated emissions permit limits, flow accelerated corrosion and high energy piping systems and co-firing air classified refuse with coal in a large power boiler. My career spans more than 40 years and covers all aspects of design, equipment selection, construction, start-up, operation, maintenance and management of coal, nuclear, natural gas and renewable generation across the United States. The breath of my experience is wide and somewhat remarkable in an industry comprised of persons with focused and limited exposure to specific issues and tasks.

I would like to learn more about this expert >>

  Machine Design Expert #21247F

Scientific Director and Chief Executive Officer, Canada

I have 28 years of experience in the field of mechanical engineering, with specific knowledge of machine design, automotive engineering and failure analysis. I have published on such topics as fatigue and fracture mechanics of offshore structures, automotive structural design and mechanical design methodology. I have testified 15 times on topics such as machine failures, personal injuries involving machinery and design of automotive systems.

I would like to learn more about this expert >>

  Pressure Vessels, Piping Expert #2294EF

President, Southwestern US

I have 57 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of pressure vessels, piping and transport tanks and vessels. I have published on such topics as transport tanks, remaining safe life, fracture toughness and nuclear equipment. I have testified 15 times on topics such as underground piping, ore unloaders, ore crushing machinery and and underground fuel systems.

I would like to learn more about this expert >>

  Fluid Dynamics, Fluid Flow Expert #001326

Professor of Mechanical Engineering, Southwestern US

I have 51 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of fluid dynamics, heat transfer and thermodynamics. I have published on such topics as drag and lift on flow past bodies, offhore structures and heat transfer. I have testified 10 times on topics such as offshore structure design, laundry press and bakery machine. I have won numerous teaching awards.

I would like to learn more about this expert >>

  Heavy Duty Emission Testing Expert #228A2E

President Chief Executive Officer, Southwestern US

I have 50 years of experience, and specialize in the field of heavy-duty engine emissions with specific knowledge in the area of diesel engines and test protocols. I have published on such topics as engine testing and emissions. I have testified on engine testing results. I have been to Russia over 100 times assisting them with pollution control and product supplies for their export automobiles -- and also many other countries over the years.

I would like to learn more about this expert >>

  Heat Transfer, Thermocouples Expert #01AA92

Professor of Mechanical Engineering, Southwestern US

I have 50 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of heat transfer, experimental work and uncertainty analysis of experiments. I have published on such topics as convective heat transfer theory, electronics coolng and heat exchangers, and uncertainty analysis. I have testified on heat transfer, instrumentation. I have both industrial (10 years) and academic experience (31 years) in heat transfer and related areas, and considerable pubic speaking experience as well.

I would like to learn more about this expert >>

  Structual Vibration Expert #203B22

Chief Engineering Scientist, Northeastern US

I have 50 years of experience, and specialize in the field of vibration with specific knowledge in the areas of structural vibration, vibration and noise reduction and structural damping. I have published on such topics as vibration criteria for healthcare facilities, design of facilities with extreme vibration requirements and prediction of sound-induced stress. I have testified on hearing damage from loudspeakers and injury from forklift. I have held senior positions in several technical societies and received a number of technical awards. I have presented courses and lectures on four continents.

I would like to learn more about this expert >>

  Offshore Drilling and Protection Expert #0092D0

Southeastern US

I have 50 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of machine design, engineering mechanics and offshore drilling and production. I have published on such topics as drilling, mechanics of long tubulars and machine design. I have testified on downhole tools, paint ball gun and ceiling fan. I have had the joy of doing a variety of things over my career from industrial research to design to field operations. I have equally enjoyed academic administration, teach and research.

I would like to learn more about this expert >>

  Structural Analysis, Shock Expert #00134B

Owner, Mid-Atlantic US

I have 50 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of machine design, vibration, structural analysis, and thermal sciences. I have published on such topics as fiber optics, machine and optical design encompassed in 17 US patents. I have testified 11 times on topics such as burn injury from welding fire in RR shop, defective products and premises liability.

I would like to learn more about this expert >>

  Heating, Air Conditioning Expert #001B44

Principal, Southeastern US

I have 50 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of heating, ventilation and air conditioning (HVAC), furnaces, plumbing, and boilers. I have testified 40 times on topics such as carbon monoxide formation, explosions, gas leaks, asbestos souorces, mold formation and furnace failures.

I would like to learn more about this expert >>

  Forensic Engineering Expert #20A7A1

President, Southwestern US

I have 48 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of HVAC design, plumbing design and electrical design. I have testified on federal construction contract interpretation, potable water distribution system failures and smoke damage.

I would like to learn more about this expert >>

  Consumer Products Expert #019F13

Principal, Southwestern US

I have 47 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of safety, testing and analysis and consumer products. I have testified 99 times on topics such as slip, trip and fall, playground accidents, ladder collapse, chairs and furniture failure and garment flammabilty and other burns. I have been active as "hands-on Ingineur" and consultant continuously for 50 years.

I would like to learn more about this expert >>

  Refrigeration, Food Processing Expert #227493

President, Midwestern US

I have 46 years of experience, and specialize in the field of engineering with specific knowledge in the areas of mechanical engineering, refrigeration and heating, ventilating and air conditioning. I have published on such topics as refrigeration system design and applications, refrigerated warehouse design and construction and refrigerated building design. I have testified 10 times on topics such as refrigerated equipment design and applications, refrigerated system design and application and refrigerated building design and construction. International society president of 56,000 members for the worldwide engineering society entitled American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE).

I would like to learn more about this expert >>

  Structural Integrity Expert #221B12

Emeritus Professor, United Kingdom

I have 45 years of experience, and specialize in the field of structural design with specific knowledge in the areas of high temperature design problems, computational methods and life assessment. I have published on such topics as structural design. I have testified on the construction of a swimming pool.

I would like to learn more about this expert >>

  Fire, Explosions Expert #1FF029

Professor Emeritus and Honorary Research Professor, Canada

I have 45 years of experience, and specialize in the field of thermodynamics, heat transfer, materials and fire and explosion with specific knowledge in the areas of fire, explosion and BLEVE. I have published on such topics as BLEVE, Flixborough, Buncefield explosion and heat transfer, materials, fire and explosions. I have testified on steam explosions.

I would like to learn more about this expert >>

  Pressure Vessels, Tanks Expert #011299

Owner, Southeastern US

I have 45 years of experience, and specialize in the field of mechanical engineering with specific knowledge in the areas of pressure vessels, tanks and presure equipment. I have published on such topics as pressure vessel low temperature requirements. I have testified on worker fatality due to exploding vessel and tank. Clients include some of the world's largest oil companies such as ExxonMobil, Chevron, Shell, etc.

I would like to learn more about this expert >>

  Heat Exchangers, Automotive Expert #000441

Professor Emeritus of Mechanical Engineering, Mid-Atlantic US

I have 45 years of experience, and specialize in the field of heat transfer with specific knowledge in the areas of heat exchangers, enhanced heat transfer and heat exchanger design. I have published on such topics as enhanced heat transfer, heat exchanger design and boiling and condensing. I have testified on patent infringement, heat exchanger design and enhanced heat transfer.

I would like to learn more about this expert >>

  Engineering Investigation Expert #019EFB

President, Southwestern US

I have 45 years of experience, and specialize in the field of engineering with specific knowledge in the areas of marine, cogeneration and heavy equipment. I have published on such topics as equipment maintenance, heavy duty equipment. I have testified on marine engines and cogeneration power plants. I have never lost a case.

I would like to learn more about this expert >>

  Marine Engineering Expert #21247C

Professor, Northeastern US

I have 45 years of experience in the field of marine and mechanical engineering, with specific knowledge of marine power plants, shore-side power plants and energy conversion systems. I have published on such topics as marine power plants, Arctic ship transportation and nuclear power for ships. I have testified on diesel and steam propulsion plants, cargo pumping system failures and ship design leading to tripping accidents.

I would like to learn more about this expert >>

  Automotive, Railroad, Tests Expert #226727

Owner, Midwestern US

I have 45 years of experience, and specialize in the field of railroad freight car engineering with specific knowledge in the areas of car design, component design and safety appliances. I have published on such topics as railroad coupling systems, intermodal cars and comparison of test results with service experience. I have testified 18 times on topics such as effect of safety appliances on employee injuries, causes of freight car fatigue cracks. I have worked in the field of freight car engineering as an employee of a railroad, a railcar manufacturer, and for one of the largest owner of freight cars.

I would like to learn more about this expert >>