Woodworking Expert #208506

Professor, Mid-Atlantic US

I have 30 years of experience, and specialize in the field of woodworking with specific knowledge in the areas of safety and liability, industrial arts and technology education. I have published on such topics as safety and facility design. I have been a woodworker for over 40 years, and have extensive training and education in the area. I have taught woodworking, shop/lab safety, and facility design for over 30 years. I served as an expert witness in a case involving a woodworking accident, and am currently serving as an expert witness in a case involving a woodworking accident which resulted in death. I authored a section on woodworking safety and facilities in a state department of education safety guideline.

I would like to learn more about this expert >>

  Memory Products Expert #1FF5A0

Partner, Southwestern US

I have 25 years of experience, and specialize in the field of memory products with specific knowledge in the areas of DRAM, DRAM Modules and SRAM. I have published on such topics as DRAM, DRAM modules, NOR flash, NAND flash, lithium ion (Li-ion) batteries, SSD NAND flash, packaging for memory products, strategic company technology and manufacturing, lithium ion batteries and memory market roadmaps. I have testified on DRAM modules and the DRAM market. I have accurately forecast trends in the DRAM and memory industry based upon correctly understanding end market directions. I am published on memory products and have supported legal teams on five occasions.

I would like to learn more about this expert >>

  Semiconductors Expert #01B4CC

Professor Emeritus, Southeastern US

I have 45 years of experience, and specialize in the field of semiconductors and ICs with specific knowledge in the areas of IC processing, semiconductor devices and electronic design. I have published on such topics as chemical-mechanical planarization (CMP), 3D integration platforms and RF/microwave technology. I have testified on chemical-mechanical planarization in patent infringement cases. I have a breadth of experience in many aspects of semiconductor/IC technology, including processing, devices and circuit design. I have a broad perspective of industrial practice and starting in 2006 have launched a part-time career as an expert witness in cases using my 40 years of experience in research and development.

I would like to learn more about this expert >>

  Equipment, Patents, Reliability Expert #2282DF

President and Principal Consultant, Northeastern US

I have 35 years of experience, and specialize in the field of electronic manufacturing with specific knowledge in the areas of surface mount technology, components and assembly. I have published on such topics as surface mount technology processes, surface mount technology equipment and surface mount technology materials. I have testified 10 times on topics such as patent infringement, proprietary knowledge and assembly processes. I was fortunate enough to be involved in surface mount technology from its inception in the late 1970's and have contributed heavily having co-developed processes and methodologies and am internationally recognized as an expert in this field. I am also fortunate enough to be recognized as a key teacher and present workshops and papers worldwide.

I would like to learn more about this expert >>

  Broadband Policy Expert #0103B6

Senior Vice President, Mid-Atlantic US

I have 20 years of experience, and specialize in the field of technology with specific knowledge in the areas of online and e-commerce, wireless and technology policy. I have published on such topics as FCC's national broadband plan, Universal Service Fund and wireless data. I have testified on Internet advertising, Internet fraud and Internet regulation.

I would like to learn more about this expert >>

  Chemicals, Equipment, Processes Expert #000C8E

President, Southeastern US

I have 50 years of experience, and specialize in the field of pulp, paper and allied industries with specific knowledge in the areas of papermaking, coating and papermaking chemicals and equipment. I have published on such topics as paper coating, thermal and digital papers and sustainable packaging materials development. I have testified 15 times on topics such as carbonless paper, paper chemicals and personal injury on papermaking equipment. I have education and experience background that includes technical training in pulp and paper technology, papermaking and coating technical and operations management, paper chemicals and papermaking equipment marketing. For the past several decades, I have been involved in development of and due diligence on project financing and bankruptcy workouts in the paper industry.

I would like to learn more about this expert >>

  Safety Laser Expert #227143

President, Southeastern US

I have 45 years of experience, and specialize in the field of safety and regulations with specific knowledge in the areas of lasers and light (optical) radiation, medical devices and ionizing radiation. I have published on such topics as state regulations of lasers and laser users, tanning booth use and regulation and safety interlock designs for high power lasers. I have testified on probability of a laser eye injury to a worker and who should have been responsible for avoiding it, responsibility of corporate officers for FDA compliance and the compliance of a laser light show projector in vovled in a lawsuit. The amazing diversity of devices, products, locations and industries I have had the opportunity to experience. I have worked with industrial, automotive, entertainment, medical, aesthetic, contruction, rock concerts, presidential inaugurations, etc. It has taken me all over the world as well; simply amazing.

I would like to learn more about this expert >>

  Optical, Expert #2025F0

University Associate - retired, Southwestern US

I have 40 years of experience, and specialize in the field of optical data storage with specific knowledge in the areas of optical heads, optical discs and modulation and coding. I have published on such topics as optical disc design, error sources, and signal to noise ratio and modulation and error correction. I have testified 13 times on topics such as see above optical heads, optical discs and modulation and coding.

I would like to learn more about this expert >>

  Vibration Damage Investigation Expert #1FF040

Explosives Engineer, Midwestern US

I have 40 years of experience in the field of blasting, explosives and vibration damage, with specific knowledge of blasting, explosives and blast vibration damage. I have published on such topics as blast design, blast vibration damage and blast cost analysis. I have testified 25 times on topics such as blasting injuries or fatalities, blast vibration damage and explosives patent infringement.

I would like to learn more about this expert >>

  Fire Investigation, Open Neutral Expert #02B3EA

Certified Forensic Consultant, Southeastern US

I have 40 years of experience, and specialize in the field of electrical and mechanical failures with specific knowledge in the areas of lightning, grounding and component level failures. I have published on such topics as circuit breaker failures, open neutral/floating grounds and flame rollout of gas-fired appliances. I have testified 36 times on topics such as electrical fires, gas appliance fires and lightning damage to equipment. I have an extensive hands-on, field experienced background that provides me with the ability to diagnose the failure mode of electrical/mechanical devices, and then to trace the cause of the failure to component level, or to the external event.

I would like to learn more about this expert >>

  Telecom, Network Expert #201101

Southeastern US

I have 39 years of experience and specialize in the field of geographic information system (GIS), with specific knowledge of telecommunications, cartography and geospatial analysis. I have published on such topics as GIS, telecom networks and utility mapping. I have testified on telecom construction practices and telecom billing systems.

I would like to learn more about this expert >>

  Textiles, Fibers, Yarns Expert #203637

Southern US

I have 35 years of experience in the field of textiles, with specific knowledge of processing machinery, quality and end products. I have published on such topics as quality control and defects diagnosis, statistical process control (SPC) and quality control (QC). I have testified on garment quality defects, machinery issues and diagnostics.

I would like to learn more about this expert >>

  Content Management Expert #20C1D4

CEO, Principal Consultant, Southeastern US

I have 33 years of experience, and specialize in the field of technology with specific knowledge in the areas of information systems, software and SharePoint. I have published on such topics as Microsoft SharePoint, Microsoft content management server and several white papers. I have testified on technology, software operation and patent infringement.

I would like to learn more about this expert >>

  Computer Display Technology Expert #222A07

President, Northeastern US

I have 32 years of experience, and specialize in the field of various computer technologies with specific knowledge in the areas of computer graphics software and hardware, digital imaging and software programming. I have published on such topics as computer graphics software and hardware, digital imaging and software programming. I have testified 15 times on topics such as computer graphics software and hardware, digital imaging and software programming.

I would like to learn more about this expert >>

  Photonics, Optoelectronics Expert #22A11B

Director, Southwestern US

I have 30 years of experience, and specialize in the field of market analysis with specific knowledge in the areas of photonics, lasers and LEDs and compound semiconductors. I have published on such topics as lasers and LEDs, photonics and compound semiconductors. I have testified on photonics. I spent three years at the U.S. Congress on technology policy analysis, several years at a trade association working on an international project with Japan, many years in market analysis, and many early years in engineering. The varied background has been valuable to provide perspective.

I would like to learn more about this expert >>

  Semiconductors, Back End Expert #222938

Chief Executive Officer, Israel

I have 30 years of experience, and specialize in the field of technology with specific knowledge in the areas of semiconductors backend, printed circuit board (PCB) inspection, and defect detection. I have published on such topics as wafer inspection after probing, probe mark analysis and post dicing inspection. I have testified on wafer inspection patent infringement. With 10 years of teaching on top of my 30 years high tech leadership, it came naturally to explain complex physics to juries in the trial.

I would like to learn more about this expert >>

  Advanced Process Control Expert #2062CD

Southern US

I have 30 years of experience, and specialize in the field of micro-fabrication technology with specific knowledge in the areas of advanced process control, lean manufacturing and interdisciplinary education in micro to nano-scale materials, processing, and devices. I have published on such topics as cost reduction through corporate wide knowledge sharing, entrepreneurial education and advanced process control implementation. I have testified on advanced process control techniques.

I would like to learn more about this expert >>

  Video Game Design Expert #001160

Consultant, Southwestern US

I have 30 years of experience, and specialize in the field of software engineering with specific knowledge in the areas of games, interactive video and flash actionscript. I have published on such topics as software languages, CD-ROM and software distribution. I have testified on standards for software development, project management and online games.

I would like to learn more about this expert >>

  Group Communication Expert #203FF7

Midwestern US

I have 30 years of experience and specialize in the field of technology management, with specific knowledge of digital communications, entrepreneurship and communications. I have published on such topics as entrepreneurship, mergers and acquisitions, and technology. I have testified on business management and case specific knowledge.

I would like to learn more about this expert >>

  Group Communication Expert #203FF7

Midwestern US

I have 30 years of experience and specialize in the field of technology management, with specific knowledge of digital communications, entrepreneurship and communications. I have published on such topics as entrepreneurship, mergers and acquisitions, and technology. I have testified on business management and case specific knowledge.

I would like to learn more about this expert >>